User's Manual

T3270S Bonded VDSL Wireless AC Gateway Router

Connecting a Computer to the Router

To connect a computer to the Router to access the Router’s graphical

user interface (GUI):

1. Get the Router and black Power cord from the box.

2. Plug the black Power cord in the black port on the back of the Router

and then into a power outlet.

3. Plug the yellow Ethernet cable from the box into one of the four yellow

Ethernet ports on the back of the Router.

4. Make sure the computer is powered on, then plug the other end of the

yellow Ethernet cable into an Ethernet port on the computer.

5. Make sure that the LED on the LAN port into which the Ethernet cable

is plugged glows steadily green. This may take a few moments.

6. The computer should either be configured with a statically defined IP

address and DNS address, or instructed to automatically obtain an