User manual

72
Actiontec USB/Ethernet DSL Modem User Manual
73
Appendix B Setting up Static IP on a Computer
7. The “Local Area Connection Properties” window appears. Click General.
8. In the “Components checked are used by this connection” list box, double-
click Internet Protocol (TCP/IP).
9. The “Internet Protocol (TCP/IP) Properties” window appears.
10. In the General tab, make sure the radio button next to “Obtain an IP Address
automatically” is active (contains a black dot). If the radio button is already
active, leave it alone.
11. Enter the following numbers in the “IP Address” text box:
192.168.0.2
Press the space bar on the keyboard to add the periods between the numbers.