User manual

36
Actiontec USB/Ethernet DSL Modem User Manual
37
Chapter 6 Configuring Advanced Settings
The “WAN IP Address” screen appears.
WAN IP Address allows manual set up of the IP address of the Modem. There are
five ways to do this: PPPoA, PPPoE, RFC 1483 Transparent Bridging, RFC 1483
via DHCP, and RFC 1483 via Static IP.
☞
Note: Some DSL providers use PPPoE/PPPoA to establish com-
munication with an end user. If unsure about which connection
is present, check with the ISP before continuing.