User manual

34
Advanced Settings
2. Click OK in the pop-up window. ScreenBeam Pro will reboot.
After ScreenBeam Pro reboots, it will be running with its default settings.
Updating ScreenBeam Pro’s Firmware
To update ScreenBeam Pro’s firmware
1. Download the latest firmware from Actiontec’s website:
http://www.actiontec.com/sbupdate
Note: You should disconnect from the receiver’s SSID and connect to a router’s
SSID before downloading firmware.
2. Log into ScreenBeam Pro’s web server, then click Firmware Upgrade. On
the Firmware Upgrade tab page, you can check the current firmware ver-
sion in the “Firmware Version” section.