User's Manual

http://support.screenbeam.com | http://support.screenbeam.com/ticket
Copyright © 2018 Actiontec Electronics, Inc.
Published September 2018, P/N 0530-0796-001
o Refer to Log into the Management Console
• Option 2
Option 2 Option 2
Option 2 -
--
- Access
AccessAccess
Access the receiver via a Wi
the receiver via a Withe receiver via a Wi
the receiver via a Wi-
--
-Fi Miracast P2P connection
Fi Miracast P2P connectionFi Miracast P2P connection
Fi Miracast P2P connection
o On your Windows 10/8.1 device with Miracast
o Use Connect (Win10) or Charm (Win8.1) to connect to the ScreenBeam receiver
o Once connected, enter the following URL into the browser’s address text box:
http://192.168.16.1
o Refer to Log into the Management Console
• Log into the Management Console
Log into the Management ConsoleLog into the Management Console
Log into the Management Console
o You may encounter a browser error that states “There’s a problem with the wireless
security certification.” Manually accept the connection by doing one of the following:
 For Chrome browser: click Advance
AdvanceAdvance
Advance, then click Proceed
ProceedProceed
Proceed.
 For Edge/IE browser: click Continue to this webpage (not recommended)
Continue to this webpage (not recommended)Continue to this webpage (not recommended)
Continue to this webpage (not recommended).
o When the ScreenBeam management console page appears, enter the following:
 Username: Administrator
AdministratorAdministrator
Administrator
 Password: Actiontec
ActiontecActiontec
Actiontec
o Click Login.
Login.Login.
Login.
o The ScreenBeam receiver management webpage should display.
E
EE
E SETUP SCREENBEAM FOR
SETUP SCREENBEAM FOR SETUP SCREENBEAM FOR
SETUP SCREENBEAM FOR WIRELESS DISPLAY OVER LAN
WIRELESS DISPLAY OVER LANWIRELESS DISPLAY OVER LAN
WIRELESS DISPLAY OVER LAN
Under the Features
FeaturesFeatures
Features webpage.
• ScreenBeam App support is enabled by default for Mac/iOS and Win7
• Enable AirPlay Mirroring for Mac/iOS support if needed. Note that security PIN is not supported
for this mode.
• Enable Windows 10 Miracast over LAN support if needed. Note that security PIN is only
supported by Win10 starting from build 1809 (and later).