User's Manual

http://support.screenbeam.com | http://support.screenbeam.com/ticket
Copyright © 2018 Actiontec Electronics, Inc.
Published September 2018, P/N 0530-0796-001
Recommended
Recommended Recommended
Recommended System Requirements
System RequirementsSystem Requirements
System Requirements
• Wireless display over P2P
Wireless display over P2PWireless display over P2P
Wireless display over P2P
o OS: Windows 10 version 1703 (and later)
o Processor: 4
th
Gen Intel Core I-Series 4xxx or AMD equivalent (or better)
o Graphics: Intel HD Graphics 4xxx (or better)
o Wi-Fi: (one of the following)
 Intel Dual-Band Wireless AC 726x (or better)
 Qualcomm Atheros Wireless AC 61x4A or 93xx
 Marvell Avastar Wireless AC with driver 15.68.9120.47 (or equivalent)
• Wireless display over LAN
Wireless display over LANWireless display over LAN
Wireless display over LAN
o ScreenBeam App requirements
 iOS 11.3 (or later)
- Processor: A9 (or better)
 macOS X 10.8 (or later)
- Processor: Intel Core I-Series 4xxx or AMD equivalent (or better)
- RAM: 4GB (or more)
- Wi-Fi: 802.11n/ac
 Win 7 with Service Pack 1
- Processor: Intel Core I-Series 4xxx or AMD equivalent (or better)
- RAM: 4GB (or more)
- Wi-Fi: 802.11n/ac
o macOS and iOS native screen mirroring requirements
 macOS device
- OS X 10.8 (or later)
 iOS device
- iOS 10.2 (or later)
o Windows 10 Miracast over LAN
 Windows 10 version 1809 (or later)
Recommended Network Requirements
Recommended Network RequirementsRecommended Network Requirements
Recommended Network Requirements
• Wireless display over P2P
Wireless display over P2PWireless display over P2P
Wireless display over P2P
No network configuration is required for Wi-Fi Miracast capable device. However, you may
need to verify the domain group policy and firewall settings to allow Wi-Fi Direct groups or adhoc
connection.
• Wireless display over LAN
Wireless display over LANWireless display over LAN
Wireless display over LAN
o ScreenBeam receiver
 Ethernet connection: 100Mbps
 Or Wi-Fi connection: 802.11n/ac (5GHz Non-DFS). Refer to the section below for
instructions on how to setup wireless connection.
o Client device
 Preferred 5GHz Wi-Fi connection
 Reliable connection with signal strength of 80% (or better)