User Manual

3
Connecting the
Receiver
This chapter details how to connect ScreenBeam Mini 2 Receiver to an HDTV
monitor, and how to set it up for the first time. Make sure you have all the contents
from the Receiver’s package available before beginning the installation.
Connecting to an HDTV
To connect Receiver to an HDTV monitor:
1. Get the Receiver, USB cable, power adapter, and HDMI extension cable
from the Receiver’s package.
2. Plug the small male connector of the USB cable to the Power port on the
Receiver.
3. Plug the Receiver into an available HDMI port on the HDTV.
4. Plug the large male connector of the USB cable to the power adapter, and
plug the power adapter to a power outlet.
When Steps 1-4 are complete, the hardware should be connected as shown
in the figure below:
2