Owner's Manual
Table Of Contents
- Introduction
- Connecting the Router
- Configuring My Network Settings
- Using Network Connections
- Configuring the Router’s Security
- Using Parental Controls
- Using Advanced Settings
- Firmware Upgrade
- Firmware Restore
- Configuration File
- System Settings
- Date and Time
- Scheduler Rules
- Routing
- IP Address Distribution
- Diagnostics
- Restoring Default Settings
- Reboot the Router
- MAC Cloning
- ARP (Address Resolution Protocol) Table
- Users
- QoS
- Local Administration
- Remote Administration
- Dynamic DNS
- DNS Server
- Network Objects
- Universal Plug and Play (UPnP)
- Protocols
- Monitoring the Router
- Troubleshooting
- Quality of Service
- Specifications
- Notices
- Limited Warranty
92
Actiontec Broadband Router User Manual
93
Chapter 7 Using Advanced Settings
8. If applicable, click New Hours Range Entry to define an active/inactive hourly
range. The “Edit Hour Range” screen appears. Enter a start and end time in the
appropriate text boxes.
9. Click Apply.
☞
Note: Make sure the Router’s date and time settings are properly
configured for the time zone.
Routing
Access the routing table rules by clicking Routing in the Advanced screen. The
“Routing” screen appears.
Routing rules can be added, edited, or deleted from the Routing screen. To add a
router, click New Route. The “Route Settings” screen appears.