Owner's Manual
Table Of Contents
- Introduction
- Connecting the Router
- Configuring My Network Settings
- Using Network Connections
- Configuring the Router’s Security
- Using Parental Controls
- Using Advanced Settings
- Firmware Upgrade
- Firmware Restore
- Configuration File
- System Settings
- Date and Time
- Scheduler Rules
- Routing
- IP Address Distribution
- Diagnostics
- Restoring Default Settings
- Reboot the Router
- MAC Cloning
- ARP (Address Resolution Protocol) Table
- Users
- QoS
- Local Administration
- Remote Administration
- Dynamic DNS
- DNS Server
- Network Objects
- Universal Plug and Play (UPnP)
- Protocols
- Monitoring the Router
- Troubleshooting
- Quality of Service
- Specifications
- Notices
- Limited Warranty
90
Actiontec Broadband Router User Manual
91
Chapter 7 Using Advanced Settings
Date and Time
To configure date, time, and daylight savings time settings perform the following:
1. Click Date and Time in the Advanced screen. The “Date and Time” screen
appears.
2. Select the local time zone from the drop-down list. The Router can automati-
cally detect daylight saving setting for selected time zones. If the daylight sav-
ing settings for a time zone are not automatically detected, the following fields
will be displayed:
• Enabled - Select this check box to enable daylight saving time.
• Start - Date and time when daylight saving starts.
• End - Date and time when daylight saving ends.
• Offset - The time amount daylight saving time changes.