Owner's Manual
Table Of Contents
- Introduction
- Connecting the Router
- Configuring My Network Settings
- Using Network Connections
- Configuring the Router’s Security
- Using Parental Controls
- Using Advanced Settings
- Firmware Upgrade
- Firmware Restore
- Configuration File
- System Settings
- Date and Time
- Scheduler Rules
- Routing
- IP Address Distribution
- Diagnostics
- Restoring Default Settings
- Reboot the Router
- MAC Cloning
- ARP (Address Resolution Protocol) Table
- Users
- QoS
- Local Administration
- Remote Administration
- Dynamic DNS
- DNS Server
- Network Objects
- Universal Plug and Play (UPnP)
- Protocols
- Monitoring the Router
- Troubleshooting
- Quality of Service
- Specifications
- Notices
- Limited Warranty

88
Actiontec Broadband Router User Manual
89
Chapter 7 Using Advanced Settings
Port
Enter the port number of the E-mail server in this text box.
Server Requires Authentication
If the E-mail server requires authentication, click in this check box, then enter a user
name and password in the “User Name” and “Password” text boxes that appear.
Auto WAN Detection
When activated, Auto WAN Detection causes the Router to automatically search for
a WAN connection.
Enable Logging
Clicking in this check box activates automatic WAN detection.
PPP Timeout
Enter the amount of time (in seconds) before the Router stops attempting to
establish a broadband PPP connection.
DHCP Timeout
Enter the amount of time (in seconds) before the Router stops attempting to
establish a broadband DHCP connection.
Number of Cycles
Enter the number of times the Router attempts to detect a broadband PPP and
DHCP connection.
Auto Detection Continuous Trying
Click in this check box to cause the Router to indefinitely search for a
broadband connection.