Owner's Manual
Table Of Contents
- Introduction
- Connecting the Router
- Configuring My Network Settings
- Using Network Connections
- Configuring the Router’s Security
- Using Parental Controls
- Using Advanced Settings
- Firmware Upgrade
- Firmware Restore
- Configuration File
- System Settings
- Date and Time
- Scheduler Rules
- Routing
- IP Address Distribution
- Diagnostics
- Restoring Default Settings
- Reboot the Router
- MAC Cloning
- ARP (Address Resolution Protocol) Table
- Users
- QoS
- Local Administration
- Remote Administration
- Dynamic DNS
- DNS Server
- Network Objects
- Universal Plug and Play (UPnP)
- Protocols
- Monitoring the Router
- Troubleshooting
- Quality of Service
- Specifications
- Notices
- Limited Warranty
34
Actiontec Broadband Router User Manual
35
Chapter 4 Using Network Connections
Broadband Ethernet Connection
A Broadband Ethernet connection connects the Router to the Internet using an
Ethernet cable. Click Broadband Connection (Ethernet) from the Network
Connections screen to generate the “Broadband Connection (Ethernet) Properties”
screen. This screen displays a list of the connection’s properties. The only modifica-
tions that can be made from this screen are disabling the connection (by clicking
Disable) or renaming the connection (by entering a new name in the “Rule Name”
text box).
☞
Note: If disabling the connection, the Router must be rebooted
for the change to take effect.