Owner's Manual
Table Of Contents
- Introduction
- Connecting the Router
- Configuring My Network Settings
- Using Network Connections
- Configuring the Router’s Security
- Using Parental Controls
- Using Advanced Settings
- Firmware Upgrade
- Firmware Restore
- Configuration File
- System Settings
- Date and Time
- Scheduler Rules
- Routing
- IP Address Distribution
- Diagnostics
- Restoring Default Settings
- Reboot the Router
- MAC Cloning
- ARP (Address Resolution Protocol) Table
- Users
- QoS
- Local Administration
- Remote Administration
- Dynamic DNS
- DNS Server
- Network Objects
- Universal Plug and Play (UPnP)
- Protocols
- Monitoring the Router
- Troubleshooting
- Quality of Service
- Specifications
- Notices
- Limited Warranty
22
Actiontec Broadband Router User Manual
23
Chapter 3 Configuring My Network Settings
Timeout for Inactive Device
The amount of time a device continues to be displayed on the network after it has
been disconnected is configured in the “Timeout for Inactive Device” screen. To
display the screen, click Timeout for Inactive Device.
Select the timeout period from the “Timeout” drop-down list. After the device has
been disconnected for this amount of time, it will no longer be displayed in the
“My Network” column.