Owner's Manual
Table Of Contents
- Introduction
- Connecting the Router
- Configuring My Network Settings
- Using Network Connections
- Configuring the Router’s Security
- Using Parental Controls
- Using Advanced Settings
- Firmware Upgrade
- Firmware Restore
- Configuration File
- System Settings
- Date and Time
- Scheduler Rules
- Routing
- IP Address Distribution
- Diagnostics
- Restoring Default Settings
- Reboot the Router
- MAC Cloning
- ARP (Address Resolution Protocol) Table
- Users
- QoS
- Local Administration
- Remote Administration
- Dynamic DNS
- DNS Server
- Network Objects
- Universal Plug and Play (UPnP)
- Protocols
- Monitoring the Router
- Troubleshooting
- Quality of Service
- Specifications
- Notices
- Limited Warranty
15
Configuring My
Network Settings
Once the Broadband Router is physically connected and the MegaControl Panel’s
Home screen is displayed in a web browser, a list of the devices connected to the
Router’s network appears in the “My Network” section of the screen. From here,
some basic network settings can be configured.
Accessing My Network
To access My Network, click on the “My Network” icon in the Home screen.
The “My Network” screen appears:
On the far right side of the screen, in the “Connected Devices” section, is list of the
devices currently connected to the network, listed by connection type and num-
ber. The restof the screen contains the “My Network” section, which displays each
device connected to the network, and a series of configuration settings.
3