Owner's Manual
Table Of Contents
- Introduction
- Connecting the Router
- Configuring My Network Settings
- Using Network Connections
- Configuring the Router’s Security
- Using Parental Controls
- Using Advanced Settings
- Firmware Upgrade
- Firmware Restore
- Configuration File
- System Settings
- Date and Time
- Scheduler Rules
- Routing
- IP Address Distribution
- Diagnostics
- Restoring Default Settings
- Reboot the Router
- MAC Cloning
- ARP (Address Resolution Protocol) Table
- Users
- QoS
- Local Administration
- Remote Administration
- Dynamic DNS
- DNS Server
- Network Objects
- Universal Plug and Play (UPnP)
- Protocols
- Monitoring the Router
- Troubleshooting
- Quality of Service
- Specifications
- Notices
- Limited Warranty
108
Actiontec Broadband Router User Manual
109
Chapter 7 Using Advanced Settings
2. Click Add. The “Edit Network Object” screen appears.
3. Specify a name for the network object in the “Description” text box.
4. Click Add. The “Edit Item” screen appears.
5. Select the type of network object type from the “Network Object Type” list box.
Options include IP address, IP Subnet, IP Range, MAC Address, and Host Name.
6. Repeat to create other network objects, if needed. When finished, click Apply
to save all created network objects.
Universal Plug and Play (UPnP)
To access the UPnP settings perform the following:
1. Click Universal Plug and Play in the Advanced screen. The “Universal Plug
and Play” settings screen appears.