Owner's Manual
Table Of Contents
- Introduction
- Connecting the Router
- Configuring My Network Settings
- Using Network Connections
- Configuring the Router’s Security
- Using Parental Controls
- Using Advanced Settings
- Firmware Upgrade
- Firmware Restore
- Configuration File
- System Settings
- Date and Time
- Scheduler Rules
- Routing
- IP Address Distribution
- Diagnostics
- Restoring Default Settings
- Reboot the Router
- MAC Cloning
- ARP (Address Resolution Protocol) Table
- Users
- QoS
- Local Administration
- Remote Administration
- Dynamic DNS
- DNS Server
- Network Objects
- Universal Plug and Play (UPnP)
- Protocols
- Monitoring the Router
- Troubleshooting
- Quality of Service
- Specifications
- Notices
- Limited Warranty
104
Actiontec Broadband Router User Manual
105
Chapter 7 Using Advanced Settings
Setting up Dynamic DNS
To set up Dynamic DNS on the Router, click Dynamic DNS in the Advanced
screen. The “Dynamic DNS” screen appears.
Configure the following parameters:
Connection To Update
Select the connection with which to couple the Dynamic DNS service. Options
include Broadband Connection (Ethernet), Broadband Connection (Coax),
and WAN PPPoE.
Offline
Disable the Dynamic DNS feature by clicking this check box. This feature is
available only to users who have purchased some type of upgrade credit from
Dyndns.org. Note that changing the redirection URL can only be performed via
the Dynamic DNS website.
User Name
Enter the Dynamic DNS user name in this text box.
Password
Enter the Dynamic DNS password in this text box.