Owner's Manual
Table Of Contents
- Introduction
- Connecting the Router
- Configuring My Network Settings
- Using Network Connections
- Configuring the Router’s Security
- Using Parental Controls
- Using Advanced Settings
- Firmware Upgrade
- Firmware Restore
- Configuration File
- System Settings
- Date and Time
- Scheduler Rules
- Routing
- IP Address Distribution
- Diagnostics
- Restoring Default Settings
- Reboot the Router
- MAC Cloning
- ARP (Address Resolution Protocol) Table
- Users
- QoS
- Local Administration
- Remote Administration
- Dynamic DNS
- DNS Server
- Network Objects
- Universal Plug and Play (UPnP)
- Protocols
- Monitoring the Router
- Troubleshooting
- Quality of Service
- Specifications
- Notices
- Limited Warranty
98
Actiontec Broadband Router User Manual
99
Chapter 7 Using Advanced Settings
Diagnostics
The Diagnostics screen can assist in testing network connectivity. This feature
pings (ICMP echo) an IP address and displays the results, such as the number of
packets transmitted and received, round trip time, and success status.
To diagnose network connectivity:
1. Click Diagnostics from the Advanced screen. The “Diagnostics” screen
appears.
2. Enter the IP address or domain name to be tested in the “Destination” field.
3. Click Go.
4. In a few seconds, diagnostics statistics will be displayed. If no new information
is displayed, click Refresh.