Specifications

ManualsBrandsActionTec ManualsComputer equipmentR1020S(U)

66 67

Appendix CAppendix B

XlV

Standard Program and Port List:

Appendix C

Application Type Application Notes˚ Required Settings for Port Forwarding

SERVICES NOTES Outgoing Connection Incoming Connection

HTTP Netscape, IE None 80 /client IP

FTP Windows FTP, Cuteftp None 21 /client IP

TELNET Windows Telnet, Neterm None 23 /client IP

POP3 Eudora None 110 /client IP

SMTP Eudora None 25 /client IP

mIRC mIRC None .

Network Time Protocol (NTP) 123 123 /client IP

PPTP Windows PPTP None 1723 /client IP

APPLICATIONS NOTES Outgoing Connection Incoming Connection

BAYVPN 500 /client IP

CarbonCopy32 1023 - 1680 /client IP

CITRIX 1494 /client IP

Cu-SeeMe

Cornell 1.1 None 7648 /client IP

. White Pine 3.1.2 7648 /client IP &

24032 /client IP

Default /client IP

. White Pine 4.0

(CuSeeMe Pro )

7648 /client IP &

24032 /client IP

Default /client IP

Direct Connect 375 - 425 /client IP

FW1VPN 259 /client IP

ICQ For file transfer, we must enable:

ICQ -> preference -> connections -

> firewall and set the firewall time

out to 80 seconds in firewall

setting.

None for Chat. Default /client IP

2. In the drop-down menu after Connect via, choose Ethernet or Ethernet Built-In.

3. Close the Appletalk window by clicking the small box in the upper left corner.

4. You may be asked to save changes to your Appletalk setting. If so, click the OK but-

ton.

5. Click the Apple menu in the upper left corner and scroll down to Chooser; then,

after the word Appltalk toward the bottom right, click the radio button before the

word “Active”.

6. You'll be asked to make sure you are connected to an Appletalk network. Click the

OK button.

7. Close the Chooser window by clicking the small box in the upper left corner.

Note: When print sharing is enabled, you cannot use a password to protect your

printer. Therefore, we strongly recommend that your leave this option enabled

only during the time you wish to share your printer with other users. When the

other users have finished printing their files on your printer, we recommend you

reverse the above process. To do so, you need not change your Appletalk settings

again. All you need to do is call up Chooser and disable Appletalk by clicking

the radio button before Inactive in the lower right corner.