Specifications

56 57
Appendix BAppendix A
XlII
XlV
Configuring File and Print Sharing For Windows 95, 98 and ME
With your Home Gateway you can establish a network that will allow you to share files
and printers. This is an easy method to set up a network in your home or small office.
Please follow these steps to setup file and print sharing:
1. On your computer’s desktop click Start, then select Settings and then select
Control Panel. In the “Control Panel” window double click the Network icon.
2. The following “Network” screen should appear. If File and Print Sharing is not
present, then click the Add button.
Appendix B
3. In the “Select Network Component Type” screen, click Service and then click the
Add button.
5. Make sure the Use 802.3 option is unchecked.
6. Disregard any # in the IP Address field. This will be correct after your first con-
nection.
7. Click the Options button and set TCP/IP to Active. Uncheck the option Load
only when needed, and click OK when finished.
8. No entries should be made in any of the other fields (which are shown as blank in
the sample image above).
9. Click Close Box in the upper left hand corner of the TCP/IP window, and then
select Save to save your settings.
10. Go to the toolbar and select Restart from the Special menu to restart your com-
puter.