Specifications

Vlll
36 37
UtilitiesUtilities
Vlll
4. Input the IP address of your home gateway (typically it will be 192.168.0.1), and
click Start. The upgrade progress will begin.
5. After the Upgrade is complete, unplug the power from the Home Gateway then
re-plug it.
6. Wait for the power LED to stop blinking and become a steady green.
7. You will need to reconfigure your Home Gateway settings.
Restore Default Settings
This allows you to restore your Home Gateway to its original default settings.
1. Click on Utilities
2. Click on Restore Default Settings.
3. Click the Restore Default Settings button.
Upgrading your Firmware
From time to time, Actiontec will post firmware upgrades to enhance your Home
Gateway’s usability. To upgrade your Home Gateway’s firmware:
1. Click on Utilities
2. Click on Upgrade Firmware. Follow the onscreen instructions.
3. After downloading the upgrade files and extracting it to a folder on your hard drive,
double click on upgrade.exe.