Specifications

Vl
18 19
Configuring the Actiontec Wireless-Ready Home GatewayConfiguring the Actiontec Wireless-Ready Home Gateway
Vl
3. Follow the on-screen instructions and then click Begin Basic Setup.
4. Make sure that you have completed the 3 steps listed then click Next.
5. Select either DSL or Cable depending on your broadband service then click Next.
(If your have a T1 Line or Fixed Point Broadband, click Cable.)
6a. If you selected DSL enter your user name and password provided by your ISP.
Click Next.
Basic Setup
Follow the step below to configure your Home Gateway:
1. Open your Internet Web Browser and in the address bar type: http://192.168.0.1
and then press the <Enter> key.
Configuring the Actiontec Wireless-Ready Home Gateway
2. When the web page is loaded, the following screen will appear. Click
Setup/Configuration.