User guide
VTGO-PC 2.8 Advanced User Guide
6
System Requirements
VTGO-PC will run on any desktop or laptop PC that meets the following minimum requirements:
• PC with 300 megahertz or higher processor clock speed recommended;
o Intel Pentium/Celeron family, or
o AMD K6/Athlon/Duron family, or compatible processor recommended
• 128 megabytes (MB) of RAM or higher recommended
• 50 megabytes (MB) of available hard disk space
• Super VGA (800 × 600) or higher-resolution video adapter and monitor
• CD-ROM or DVD drive
• Keyboard and Microsoft mouse or compatible pointing device
• Sound card and headset or USB Telephone device
• Network Interface Card 10/100 Mbps
Quick Start
Cisco CallManager Server (Cisco CallManager Administrator)
A phone must be defined in the CallManager before you can run the VTGO-PC client application.
This is accomplished using the CallManager Administration web page. Please follow the steps
below:
1. Log into the CallManager server.
2. Go to DevicePhoneAdd a New Phone. Select the phone type (7960).
3. Input the twelve-character hexadecimal MAC address of the network card of the PC or
laptop on which VTGO-PC will be installed (examples: 000000001234 or 0a0b0c0d0e0f).
4. Set the device pool to Default (or whatever is appropriate for your site).
5. Select a template that matches the number of lines needed on the base phone and then
determine if a fourteen-button sidecar module is required. Select one or two if adding a
sidecar module to the base. The maximum line count is thirty-four on all available templates.
Click Insert. Note: sidecar configuration is not available with VTGO-PC Lite.
6. Click OK to configure the directory number for line 1 of VTGO-PC. You may add additional
directory numbers as appropriate.