User guide

VTGO-PC 2.8 Advanced User Guide

Transferring a Call

To transfer a call, follow the steps below:

1. During an active call, press the Transfer button in the button bar.

2. In the transfer destination box, enter the new destination number and VTGO-PC will

automatically place a call to the transfer destination.

3. Press Transfer to complete the transfer. You also have the option of waiting for the

receiving end to answer, pre-announcing the call, and then completing the transfer.

Conferencing a Call

You may add anyone to a conference call at any time. Follow the steps below to initiate a

conference call:

1. Place a call to the first conference call destination.

2. Once you have established a connection, click the Confrn button in the button bar. This

automatically puts the first caller on hold and provides a dial tone.

3. In the destination box, enter the second conference call destination. VTGO-PC

automatically places the call for you.

4. Once you have established a connection, click the Confrn button to complete the

conference.

5. Repeat steps two through four to add additional participants to the conference. A

maximum of six participants are allowed per conference.

Leaving a Conference Call

You can leave a conference at any time by clicking the EndCall button in the button bar. After

you click EndCall the phone will go back into idle mode.