User guide

VTGO-PC 2.8 Advanced User Guide
35
Connection Diagram:
Hot-Switching from a Handset to a Headset
VTGO-PC supports several USB telephony devices. This is a list of some of the devices IP blue
currently supports:
PDT Cyberphone, Cyberphone-K, v550, V-Connect, Claritel i-750, Actiontec USB Adapter
To place and answer calls with a USB handset, simply lift the handset and dial the number. To
hang up, place the USB handset back in its cradle.
To switch from the handset to a headset, click the headset button
on the front of VTGO-PC
during a call. This will automatically switch the audio to the handset. The headset button will
light up when it is clicked
. You can then hang up the USB handset. To end the phone call,
simple click EndCall on VTGO-PC, or click the headset button. When the call is ended using the
EndCall soft key on VTGO-PC, the headset button will remain lit as the default audio device until
the headset button is clicked and the light is off.
To switch back to the USB phone during a phone call, simply lift the USB handset and the call
audio will automatically switch back to the USB.
Note: This switch is unnoticeable to the party on the other end of the phone call.
To place and answer calls using a headset, plug a headset into your sound card on the back of
your computer.