User`s guide

Index
Page 80
Error Messages
The following list of error messages are displayed by the CardTalk
Control Panel and TC utilities.
Message Resolution
A CardTalk driver has already
been installed.
You are attempting to load one
of the CARDTALK files twice.
Check your CONFIG.SYS file.
You may have two lines that
load CARDTALK.SYS or
another CardTalk file.
Allocation of device geometry
structure failed.
An error occurred while
programming a memory card.
You may have specified the
wrong card, the card may have a
bad CIS, or it may have failed in
some other way.
Can’t access file.
A failure occurred while Card
and Socket Services software
was accessing a file on a memory
card. Retry the operation. It may
be necessary to reboot the
system, or, if the card data has
somehow been damaged, to
reformat the card.
Can’t create a card object for
this socket. May be out of
memory!
Remove other applications from
memory, particularly TSRs. If
you’re in Windows, minimize
open windows or exit Windows
and load it again.
Can’t display this dialog
window. You may be low on
memory.
Minimize open windows or exit
Windows and load it again.