User`s guide

Index

Page 76

Socket Services Not Databook or Version 2.10

Installation Aborted

This message appears when Card Services is loading and it cannot find

the proper Socket Services driver already loaded. Databook Card

Services must be run with Databook Socket Services, version 3.xx. This

version is compliant with PCMCIA release 2.10.

Card Services Not Installed

This message appears if the self test failed. Make sure all driver files

are where they belong and are loaded into memory before you try again.

Refer to Chapter 3, Installing the Software, for more information.

Error in Command Tail

While CARDTALK.SYS is loading, you may receive this message

(after it displays the driver version and copyright notice):

Error in command tail: text from CONFIG.SYS

where

text from CONFIG.SYS

is the CARDTALK.SYS line from your

CONFIG.SYS file.

This message indicates an error in the options found in the

CARDTALK.SYS line. The driver has not loaded and neither have any

PCMCIA drivers that came after it in the CONFIG.SYS file. Correct

the line in your CONFIG.SYS file and restart the system. This problem

is usually caused by a typographic error such as a forward slash (/)

typed as a backward slash (\) or a spelling error.

No Socket Services BIOS Sockets Found

You may receive this message after CARDTALK.SYS (the Super

Client driver) displays the driver version and copyright notice:

Databook CardTalk Device Driver Vx.x

No Socket Services BIOS Sockets found.

where

x.x

is the version of software.