User`s guide

Installing the Software
PC-250, PC-260, and PC-300 User’s Guide Page 45
Databook CardTalk Card Services Driver V3.xx 4/22/94
Compliant with Intel ExCA Release 1.50 and PCMCIA Release 2.10
Portions Copyright (c) 1992-1994 by Ventura Micro and Award Software
Inc.
Copyright (c) 1980-1994 Databook Incorporated All Rights
Reserved.
Card Services installed successfully
Databook CardTalk Card Services Driver V3.xx 4/22/94
Copyright (c) Databook Incorporated 1990-1994. All Rights
Reserved.
Installed Socket 1 as MS-DOS drive D:.
Installed Socket 2 as MS-DOS drive E:.
In the above example, the system’s previous configuration uses drives
A through C and CardTalk assigns one drive letter to each socket.
NOTE
Drive Letters
The drive letters displayed (in this case, D and E),
are the ones you will use to access PC Cards
(memory and ATA devices) in sockets 1 and 2
respectively.
Confirm Each Socket is Working
To confirm that each slot is working properly, at the DOS prompt enter
the following:
CTALKID
The CTALKID program displays a list of the drivers, what file loaded
them into memory and their location on your system. The following is a
typical listing: