User`s guide

Installing the Software
Page 40
PC Cards that Require a Specific I/O and Memory
Window
Follow these steps to reserve I/O and memory addresses for I/O cards,
such as a network card:
1. When INSTALL asks if you wish to select I/O and memory
windows, highlight Select an I/O and Memory Window and press
Enter.
2. INSTALL asks you to enter the I/O base address for the card.
Consult the PC Card documentation for the manufacturer’s
suggested address ranges.
To accept the default starting address of 300h, press Enter. To
request a different address, type a hexadecimal number between 100
and 3FF at the Enter the I/O Window's Starting Address: prompt
and press Enter.
NOTE
Avoid Conflicting Addresses
The I/O and memory address ranges you select
must not conflict or overlap with addresses used by
other devices in your system.
3. INSTALL asks you to enter the ending I/O address.
Accept the default ending I/O address of 31F if you accepted the
default starting address and press Enter. If you entered another
starting address, enter a higher ending address at the Enter the I/O
Window's Ending Address: prompt (the maximum size of the
window is 40h, for example, 300-33F) and press Enter.
4. INSTALL asks you to enter the starting memory address for the
memory window.