User`s guide

Installing the Hardware
PC-250, PC-260, and PC-300 User’s Guide Page 27
Connect the Internal Power Cable
Connecting the Power Cable
1. If available, connect an unused power cable to the Card Socket
Module and continue with the section titled Install the Board.
2. If no power cable is available in your PC, unplug the power cable
from one of the system’s internal devices.
3. Plug the end of the power cable you unplugged from the other
device into the female end of the splitter cable.
4. Plug one male end of the splitter into the Card Reader and the other
male end into the device from which you removed the power cable.