Quick Start Manual

Quick Start Guide

Connect the Hub to a Device

Install the Configuration Utility

This Quick Start Guide will walk you through the

easy steps to install and set up your MegaPlug™

85 Mbps 4-Port Hub.During this process,we will

show you how to:

You will need the following items:

•

MegaPlug™ 85 Mbps

4-Port Hub

•

Gray Ethernet Cable

•

Power Cord

•

Installation CD

(Note: Each device that needs to

communicate using the power will

need its own MegaPlug adapter)

Questions? Call 1-888-436-0657 (USA)

Model# HPE400T

Note: If the screen above does not appear,click Start on the taskbar and then

select Run. Type d:/setup (or e:/setup,depending on the drive letter of your CD-

ROM drive),then click OK..

Step

2 When the “Welcome”

screen appears,click

Next.

Step

3 When the “Choose

Destination Location”screen

appears,click

Next.

Step

4 Please wait until the final

screen appears.Then click

Finish.

Part No:0530-0517-000 QS800/1105

NOTE ABOUT SECURITY: If you live in an apartment building or want to

take extra security measures,please see Chapter 3 of the User Manual which

is located on the Installation CD-ROM.

Congratulations! You have successfully installed the MegaPlug

85 Mbps 4-Port Hub.