Owner's Manual

Actiontec MegaPlug Wireless Network Extender User Manual

Chapter 4 Using the Web Configuration Interface

WPA-PSK

Selecting this security option applies WPA (Wi-Fi Protected Access) security with

PSK (Passkey) protection to the wireless network. To set up WPA-PSK, select a

“Cipher Type” (TKIP or AES), then enter 8-63 characters in the “Passphrase” text

box. Once activated, all wireless-enabled devices must support WPA and know the

PSK to join the wireless network.

WPA

Selecting this security option applies WPA (Wi-Fi Protected Access) security to the

wireless network. To set up WPA security, select a “Cipher Type” (TKIP or AES),

enter the IP address of the RADIUS server in the “RADIUS Server” text box, and

then enter the secret key (for communication between the RADIUS server and the

Extender) in the “RADIUS_Secret” text box.

Wireless Advanced Settings

Clicking Wireless Advanced Settings on the left side of any Interface screen

causes the “Wireless Advanced Settings” screen to appear. Here, the Extender’s

advanced wireless network security settings can be configured. Only experienced

network technicians should adjust these settings.

Data Rate

Adjust the Network Extender’s data rate here.