User's Manual

Wireless DSL Gateway User Manual
47
© 2012 Verizon. All Rights Reserved.
Select either “Accept Device List” or “Deny Device List” by clicking the 3.
appropriate radio button. Selecting “Accept…” allows only the devices listed
here by MAC address to join the Gateway’s wireless network. Selecting
“Deny…” prevents all listed devices here access to the network.
Enter the MAC address of a device in the “Manually Add MAC address” text 4.
box.
Click 5. Apply.
Repeat steps 3, 4, and 5 to add more devices to the list.6.
To remove a MAC address, select it from the “MAC Authentication Device List,”
then click Remove.
4.5.5 WPS
Selecting WPS generates the “WPS (Wi-Fi Protected Setup)” screen. This screen
allows you to activate the Gateway’s WPS option, and configure its WPS settings.
To set up WPS:
Click the WPS button to activate WPS.1.
Select the WPS type. There are three options here: Push Button (PBC), AP PIN, 2.
or End Device Pin.