User's Manual

Wireless Networking

4.1 Overview

The Gateway provides the user with wireless connectivity over the 802.11b,

g, and n standards (the most common wireless standards). 802.11b has a

maximum data rate of 11 Mbps, 802.11g 54 Mbps, and 802.11n 144 Mbps.

802.11b, g, and n operate in the 2.4 GHz range

The Gateway’s wireless feature is turned on, with wireless security activated, by

default. The default security is WPA/WPA2 PSK, with a unique PSK (pre-shared

key)already entered. This information is displayed on a sticker located on the

bottom of the Gateway.

The Router integrates multiple layers of security. These include the IEEE 802.1x

port-based authentication protocol, RADIUS client, EAP-MD5, EAP-TLS, EAP-TTLS,

EAP-PEAP, Wired Equivalent Privacy (WEP), Wi-Fi Protected Access (WPA/WPA2),

and firewall and VPN applications.

4.2 Accessing the Wireless Setup Screens

To set up a wireless network using the Gateway, or adjust the wireless network

settings, you must access the Wireless Setup screens.

To access the Wireless Setup screens:

Open a Web browser. In the Address text box, type: 1.

http://192.168.1.1

then press Enter on the keyboard.