User manual

24
Actiontec 54 Mbps Wireless Cable/DSL Router User Manual
25
Chapter 3 Performing a Basic Setup
8. The “Congratulations screen appears. The Router is successfully configured.
The Power light flashes rapidly while the Router restarts, then glows steadily green
when fully operational. The Internet light will also glow steadily green. The Router
is now configured and users can start surfing the Web.
If an error stating the Web browser was unable to connect to the Internet appears,
check the configuration settings. Ensure all the information required by the ISP is
entered correctly.
Changing the Admin User Name and Password
To create or change the admin user name and password, allowing access to the
Routers Web Configuration screens, follow these instructions:
1. From the Setup/Configuration screen, select Change Admin Password from
the menu on the left side.
2. The “Change Admin Username/Password screen appears. Enter a new
user name (optional) in the “New Username” text box, then a password in
the “New Password text box. Re-enter the password in the “Re-enter New
Password text box. Make sure to write the user name and password down
and keep them in a secure location. They will be needed to access to the
Routers Web Configurations screens in the future.
3. Click “Save and Restart at the bottom of the screen.