User's Manual
Table Of Contents
- Introduction
- Setting Up the Router
- Performing a Basic Setup
- Using Advanced Setup
- Viewing the Router’s Settings
- Using Utilities
- Setting Up a Network
- Troubleshooting
- Reference
- Setting Up Static IP on the Computer
- Computer Security
- Specifications
- Glossary
- Firewall Security Level Services Table
- Non-Windows System Setup
- Notices
- Limited Warranty
16
Actiontec 54 Mbps Wireless Cable Router User Manual
17
Chapter 2 Setting Up the Router
15. If connecting via Ethernet or wirelessly, unplug the Ethernet cable located in
step 14 from the back of the computer. If the cable modem was connected
via a USB cable adapter, unplug the Ethernet cable from both the modem and
the adapter. Click Next.
If connecting via USB, unplug the USB cable located in step 14 from the back
of the computer. Click Next.