User manual

Basic Setup

This chapter is a guide through a basic setup of the Modem for those users who

did NOT use the Actiontec Installation Buddy® to setup the Modem. The Basic

Setup includes instructions on how to connect the Modem to the ISP and changing

the user name and password allowing access to the Web Configuration screens.

To complete a basic setup, the user will need information provided by the ISP. This

information is sometimes contained in a welcome letter or ISP worksheet. If this

document is not available, contact the ISP immediately and request one.

Basic Setup

To configure the Modem for basic operation:

☞

Note: If you already set up the Modem using the Installation

Buddy (as described in Chapter 2, “Setting Up the Modem”), the

settings described in this section have already been configured.

Continue to chapter 4, “Using Advanced Setup,” to configure the

advanced settings of the Modem.

1. Open a Web browser. In the “Address” text box, type

http://192.168.0.1

then press Enter on the keyboard.

2. The “Main Menu” screen appears. Select Setup/Configuration.