Owner's Manual

For WINDOWS NT 4.00 INSTALLATION

 Check that your PCMCIA device setting is selected for boot and started. Go

to: Start-Settings-Control Panel and double-click the Devices icon. Scroll

down to the Pcmcia listing and highlight it by clicking once. If the PCMCIA

device is set correctly, you should see the screen below.

If the Pcmcia device is not set to boot and started, click once on the Startup

button. Select boot and click the OK button. Close the Devices window and

restart Windows NT before proceeding to the installation section

 Check that COM 2 is available for the modem to use. It is recommended that

you disable COM2 through your System BIOS Setup routine (read your

Computers User Manual for instructions on how to invoke the BIOS Setup).

Once inside the BIOS Setup, look for a section called Integrated Peripher-

als. Locate the entry for COM 2 or COM Port B and disable it. Save your

settings before exiting.