Owner's Manual

USING TRAVELINK SELECT

The TraveLink Select Program is opened by double-clicking the TraveLink short-

cut icon on your desktop screen or by selection from the Start-Programs menu.

Once opened, the program will autodetect your modem. If the modem is not in-

stalled, it will ask that you install it. Once detected, the country selection window

below will show the modem status and currently selected country.

To change the country that your modem is selected for, choose the name of the

country from the Country Selection option box. Once the country is selected, click

the Set button. The modem will be configured to use the PSTN (Public Switched

Telephone Network) of that particular country. (Note: the modem comes with an

RJ-11 connector as standard equipment. You may need an adapter to physically

connect your modem to the phone jack if you are in another country.) To close the

selection window, click either the Hide or Quit button.

If you choose the Hide option, the program minimizes to the lower right-hand

corner of the task-bar. It can be reactivated by clicking once on the icon.

If you place your mouse cursor over the task-bar icon, the currently selected coun-

try will be shown in the status window.