Owner's Manual
17
INSTALLING TRAVELINK SELECT
Your FM560LKI is supplied with a unique country selection program. This soft-
ware enables you to change the country setting for your modem through a user-
friendly menu. The program is a 32-bit application and Windows 95 or Windows
98 is required to run it. If you are using MS-DOS, Windows 3.10, or Windows
3.11, changing the country setting can still be accomplished by the use of the
AT%T19,0,nn command. See Appendix A, AT Commands for instructions on
using AT Commands and the AT%T19,0,nn listing for guidelines on changing the
country setting. To install the TraveLink Select program, follow the installation
instructions below.
Step 1 Turn on the computer and load Windows 95 or Windows 98. After Win-
dows has started, insert the FM560LKI into one of the computers PCM-
CIA slots.
Step 2 Insert the diskette or CD-ROM containing the TraveLink Select program
into the computers floppy disk drive or CD-ROM drive.
Step 3 Using Windows Explorer or My Computer, open the floppy drive win-
dow and double-click the TraveLink Select icon. (Note: If you are using
the CD-ROM, select Install TraveLink Select from the menu.) The file
will self extract and launch the installation utility.
Step 4 A welcome screen will appear with a caution notice asking you to close
all open applications. If you have any open or minimized applications
running, exit the installation utility and close all other programs before
proceeding. If there are no other open applications, click the Next> but-
ton to continue.