User Guide

Step
2 Plug one end of an Ethernet Cable into the Ethernet
Port on the right side of the Adapter.
Step
3 Locate your broadband modem/router. Plug the other
end of the Ethernet Cable into an open Ethernet Port on the
back of the Modem/Router.
A
Install the First Adapter
Step
1 Get one MoCA Network Adapter.
Step
5 Get the Coaxial Cable from the Adapter’s package.
Connect one end of the cable to the Coax In Port on the left side
of the Adapter.
Step
7 Get the Adapter’s power adapter. Plug the appropriate
end of the Power Adapter (External, 5V DC, 2A made by APD,
Model #WA-10P05FU) into the Power Port on the right side of
the Adapter, and plug the other end into a Power Outlet.
Note: See the gure on the back of this guide for more details.
Congratulations! You’ve successfully connected your device to
the Internet. For registration or access to user manuals,
wall-mount templates, software updates, etc., go to;
http://www.actiontec.com/339.html
B
Install Additional Adapter(s)
Step
3 Locate the device to connect to the Internet. Plug the
other end of the Ethernet Cable into an open Ethernet Port on
the back of the Device.
If necessary, additional Adapters can be placed in locations
around the home/oce that need an Ethernet Internet
connection, and are near a coaxial port.
Continue with steps 4 through 7 to complete the installation.
Repeat for additional Adapters.
Step
4 Locate the Coaxial Cable that connects your HDTV or
Set-Top Box to the nearby Coaxial Wall Port. Disconnect the
cable at the wall port, and reconnect it to the TV/STB Out Port
on the left side of the Adapter. If no device is connected to the
wall port, skip to step 5.
Step
6 Connect the other end of the Coaxial Cable to the
nearby Coaxial Wall Port.
To install, follow the instructions in the rst section of this quick
start guide, “Install the First Adapter,” except for step 3. Use the
following step 3 instead: