User manual
Table Of Contents
- Introduction
- Using Qwest DSL
- Performing a Basic Setup
- Setting Up Static IP Address
- Configuring Advanced Settings
- Accessing Advanced Settings
- WAN IP Address
- Wireless Settings
- Wireless MAC Authentication
- Wireless Advanced Settings
- DHCP Server
- Services Blocking
- Website Blocking
- Remote Management/Telnet
- Port Forwarding
- DMZ Hosting
- Firewall
- Dynamic Routing
- NAT (Network Address Translation)
- Static Routing
- IP QoS Setting
- Telnet Timeout Setting
- LAN IP Address
- Viewing the Modem’s Status
- Using Utilities
- Troubleshooting
- Reference
- Static IP Address on the Computer
- Computer Security
- Specifications
- Glossary
- Firewall Security Level Services
- Alternative System Setup
- Additional Technical Support Options
- Notices
- Limited Warranty
52
Actiontec DSL Modem User Manual
53
Chapter 6 Viewing the Modem’s Status
LAN Status
Selecting LAN Status generates the “LAN Status” screen. This screen displays on
overview of the Modem’s LAN (local area network) connections.
DHCP User List
Selecting DHCP User List generates the “DHCP User List” screen. This screen dis-
plays a list of the active and idle users on the Modem’s local area network who have
obtained an IP address from the Modem’s DHCP server.