User manual
Table Of Contents
- Introduction
- Using Qwest DSL
- Performing a Basic Setup
- Setting Up Static IP Address
- Configuring Advanced Settings
- Accessing Advanced Settings
- WAN IP Address
- Wireless Settings
- Wireless MAC Authentication
- Wireless Advanced Settings
- DHCP Server
- Services Blocking
- Website Blocking
- Remote Management/Telnet
- Port Forwarding
- DMZ Hosting
- Firewall
- Dynamic Routing
- NAT (Network Address Translation)
- Static Routing
- IP QoS Setting
- Telnet Timeout Setting
- LAN IP Address
- Viewing the Modem’s Status
- Using Utilities
- Troubleshooting
- Reference
- Static IP Address on the Computer
- Computer Security
- Specifications
- Glossary
- Firewall Security Level Services
- Alternative System Setup
- Additional Technical Support Options
- Notices
- Limited Warranty
95
Alternative
System Setup
The Modem supports both the Classic Macintosh operating systems (9.2.1 and
below), as well as OS X.
☞
Note: When installing any software, consult the user manual and
help files supplied with the software for detailed information.
Actiontec provides the following information as a guideline only.
Classic
To configure the Modem, Open Transport 2.5.2 or above must be loaded on the
computer.
1. Click Apple, Control Panels, then TCP/IP.
g