Specifications

Safety Instructions

CAUTION: Do not operate the SERIMUX with the cover removed.

• In order to avoid shorting out the SERIMUX when disconnecting the network cable, first unplug the cable from the equipment

and then from the network jack. When reconnecting a network cable to the equipment, first plug the cable into the network

jack, and then into the equipment.

• To help prevent electric shock, plug the SERIMUX into a properly grounded power source. The cable is equipped with a 3-

prong plug to help ensure proper grounding. Do not use adapter plugs or remove the grounding prong from the cable. If it is

necessary to use an extension cable, use a 3-wire cable with properly grounded plugs.

• To help protect the SERIMUX from transients in electrical power, use a surge suppressor, line conditioner, or uninterruptible

power supply.

• Be sure that nothing rests on the SERIMUX's cables and that the cables are not located where they can be stepped on or

tripped over.

• Do not spill food or liquids on the SERIMUX. If it gets wet, contact NTI Technical Support.

• Do not push any objects into the openings of the SERIMUX. Doing so can cause fire or electric shock by shorting out interior

components.

• Keep the SERIMUX away from heat sources. Also, do not block cooling vents.

Emissions

• US: FCC part 15, Class A

• Canada: ICES 003 Class A

• Europe: EN55022, EN61000-3-2, EN61000-3-3

• Japan: VCCI

• Australia: AS3548

Immunity

Europe: EN55024