Specifications

50
3. To use an NTP server, choose Enable, the NTP server’s IP address, the Time offset, and the Date and Time fields.
or
To use the internal battery fill in the Date and Time fields only.
4. Choose Save & apply.
Configuring A Device Name
The system administrator can assign a device name to the SERIMUX. This is often helpful for administration purposes to locate a
specific SERIMUX on the network. To assign the SERIMUX a device name, do the following:
1. Access the web interface.
2. Under the System administration heading, choose Device name.
3. Enter the name you want to assign the SERIMUX.
4. Choose Save & apply.
Adding, Editing, and Removing Users
The system administrator can add, remove, or edit user files easily from the web interface by doing the following:
1. Access the web interface.
2. Under the System administration heading, choose Users administration.
Figure 70- Administrator's user administration window
3. Choose to Add User, Edit User, or Remove User:
• Add a user: Assign a name, user group, and a password.
• Edit user files: Change user group, password, or their shell.
• Remove a user: Remove a user from the system.
Figure 71- Edit a user
4. Choose Save & apply.
Note: The password
for root can be
changed from the
command line
interface only using
the command passwd.