Specifications

43
Figure 58- Use Configuration menu to configure port for dial-in modem access
4. Choose Dial-in modem and configure the other configuration parameters.
5. Use the ESC key to return to the main menu.
6. Choose Save changes.
Dial-in Terminal Server Access
Individual serial ports on the SERIMUX can be configured for a dial-in terminal
server access. To use dial-in terminal server access, an external modem is
first attached to a serial port on the SERIMUX and then the serial port is
configured for dial-in terminal server mode. In the illustration below, port 7 is
configured for dial-in terminal server mode.
In terminal server mode, the user is connected directly to a server.
To configure a serial port for a dial-in terminal server, do the following:
1. Access the configuration menu.
2. Choose Serial port configuration.
3. Choose an individual port number and then Host mode configuration.
Figure 59- Use Configuration menu to configure port for dial-in terminal server access
4. Choose Terminal Server and configure the other configuration parameters.
5. Use the ESC key to return to the main menu.
6. Choose Save changes.