Specifications

39
Assigning Users To A Menu
Once a menu has been created, users can be assigned to the menu by doing the following:
1. Access the web interface.
2. Under the Custom Menus heading, choose Configuration > Menu Users.
A list of available users is displayed.
Figure 52- Assign users to a menu
3. Choose a menu for a user by selecting a menu from the drop down Assigned Menu list.
4. Choose Save & apply.
Using the Configuration Menu
The configuration menu is available through a Telnet or SSH session to the root user and system administrator. The configuration
menu enables the authorized users to configure the SERIMUX with the same functionality as is available with the web interface.
The only functionality missing from the configuration menu is the ability to create custom menus.
The root user, by default, is connected from a Telnet session to the Linux command line. In order to access the configuration
menu, the root user enters configmenu at the command prompt. The configuration menu follows the layout of the web interface.
Figure 53- The Configuration Menu
Choices for the configuration menu are made by selecting the number of a menu item. The ESC key allows the user to move back
a menu each time it is selected. Sometimes only one menu item is presented; however, that single menu item has two or more
options that have to be configured.