Specifications

38
Adding Menu Items
Once a menu name is defined and users are added, menu items can then be added. To add menu items, do the following:
1. Choose Configuration under Custom Menus and then the Menu Name hyperlink for the menu to be configured.
2. Choose Menu Items > Add Item.
The following screen appears.
Figure 51- Adding menu items
3. Fill in the desired parameters. The parameters are:
• Key: Assign any letter or number except a value already used by another menu item.
• Label: Assign a label or name for the menu item.
• Create new submenu: Assign a name for a new submenu that this menu item will be assigned or linked to.
• Go to existing submenu: Choose an existing submenu from the drop down menu that this menu item will be assigned
or linked to.
• Connect directly to a serial port: Connects the user to a specified port.
• Telnet to a remote host: Enter a remote host’s IP address or hostname.
• SSH to a remote host: Enter the hostname or IP address of a remote host and the remote username.
• Execute a custom command: Enter a customized command that is any valid command on the command line with
acceptable user privileges.
4. Choose Apply.
5. Repeat this procedure to add more menu items.
Note: To add or configure submenus, select the Submenus hyperlink on the Menu Configuration page.