Specifications

36
Port IP Filtering
To configure the SERIMUX for Port IP filtering, do the following:
1. Access the configuration menu.
2. Choose Serial port configuration.
3. Choose an individual port number or 0 (zero) for all ports > IP filtering.
Figure 47- Configure Port IP filtering through the Configuration menu
4. Choose a menu item and enter the desired parameters for the menu items.
5. Use the ESC key when all parameters are entered to return to the main menu.
6. Choose Save changes.
Sniff Sessions
To configure a port or all ports for sniff users, do the following:
1. Access the configuration menu.
2. Choose Serial port configuration.
3. Choose an individual port number or 0 (zero) for all ports > User access control.
4. Choose a menu item and enter the desired parameters for the menu items.
5. Use the ESC key when all parameters are entered to return to the main menu.
6. Choose Save changes.
For information on entering a sniff session, see "Viewing A Sniff Session" on page 32.
Authentication
1. Access the configuration menu.
2. Choose Serial port configuration.
3. Choose an individual port number or 0 (zero) for all ports > Authentication.
Figure 48- Setup user authentication through the Configuration menu
4. Choose an Authentication type.
5. Use the ESC key to return to the main menu.
6. Choose Save changes.