Specifications

Configuring Authentication for the Web Server

1. Access the web interface.

2. Choose Network > Web server configuration.

The following screen appears.

Figure 45- Configure WEB server for authentication

3. Choose an authentication method and then Save & apply.

Note: When using remote authentication for the web server, such as Radius, TACACS+, LDAP or Kerberos, the user

must also be added to the local database. See "Adding, Editing, and Removing Users" on page 48 for details. Once the

user's password is approved by the authentication server, the SERIMUX uses the local permission rights to provide

proper access privileges for the user to ports and the configuration.

Using the Configuration Menu

Network IP Filtering

To configure the SERIMUX for Network IP filtering, do the following:

1. Access the configuration menu.

2. Choose Network configuration > IP filtering.

Figure 46- Use Configuration menu to setup IP filtering

3. Choose a menu item and enter the desired parameters for the menu items.

4. Use the ESC key to return to the main menu.

5. Choose Save changes.