Specifications

Managing the SNMP Protocol

The SERIMUX SNMP protocol can be managed using an NMS or SNMP browser. However, before the NMS or SNMP browser

can access the data, the Access control settings must list the IP address of the host from which the browser is executed. See the

preceding graphic for details.

Configuring Port Event Handling

Once an SMTP or SNMP server has been configured, it can be used to send port-related alerts and notifications. The following

describes how to configure a port for port event handling.

1. Access the web interface.

2. Choose Serial port > Configuration.

3. Choose a port to configure and then Port logging.

4. Use the Port logging page to enable logging.

Figure 33- Configure a port for to enable logging of port events

5. Choose Save & apply.

6. Choose Port event handling.

The following window appears.

Figure 34- Configure port for event handling

7. Complete configuration and then choose Save & apply.

FYI: "Key word" is

any text string that

will trigger an alert

when it traverses

the serial port.