Specifications

23
Figure 27- Configure system logging services
Viewing System Logs
The system logs can be viewed from the web interface on the System logging page or from the location where they have been
saved. The following table lists the file locations of the system logs.
System Logfile
Log Storage File Location
Digi memory /tmp/logs
Compact-flash card /mnt/flash/logs
Syslog server must be viewed on the syslog server
NFS server /mnt/nfs/logs
Port Logging
If a serial port is configured for console server mode, the port logging feature can be enabled. Port logging allows the user to save
serial data to the memory of the SERIMUX, a compact-flash card, a syslog server, or to an NFS server. If the memory is used for
port logging, all data will be cleared when the system’s power is turned OFF.
Users can also define alarm keywords for each serial port and send email alerts or SNMP traps to enable unattended serial data
monitoring. To configure a serial port for port logging in console server mode, do the following:
1. Access the web interface.
2. Under the Serial Port heading, choose Configuration.
3. Choose All or the Individual port and then Port logging.
4. Configure the settings.
5. Choose Save & apply.
Note: When port logging is enabled, a Port Event Handling page is available to create alarm keywords and send alerts.
See Alerts and Notifications on page 24 for more information.